The toilet paper machine is a professional equipment for the production of toilet paper. According to the degree of automation, the toilet paper machine can be divided into: automatic toilet paper rewinder and semi-automatic toilet paper rewinder. According to different functions, the toilet paper machine can be divided into: toilet paper rewinder, toilet paper slitting machine. The following editor briefly introduces the replacement sequence of the toilet paper machine felt.

1. Fasten all parts on the vibrating screen, especially the screen plate that needs to be replaced frequently, to avoid extra vibration due to the loosening of individual parts; 2. Replace the perforated steel sieve with a polyurethane sieve or rubber sieve with small elastic modulus and low noise;

After the vibrating screen is used for a period of time, grease or dirt will adhere to the surface. If it is not cleaned in time, the screen will rust. Therefore, the impurities on the screen should be cleaned up in time after using the vibrating screen. It can be cleaned with soap, warm water or weak detergent. If there is oily dirt, you can wipe it with a soft cloth and then wash it with detergent. If there is rust on the surface of the vibrating screen, it can be cleaned with nitric acid or other derusting acids; if rainbow patterns appear, it can be cleaned with neutral detergent in warm water.

What are the reasons for the wear of the paper machine? The complete set of equipment that makes the pulp form the division of the paper web is collectively called the paper machine, including the headbox, the wire section, the press section, the drying section, the calender, the reeling machine and the transmission section The main engine and auxiliary systems such as steam, water, vacuum, lubrication and heat recovery.

The lifting mechanism of the rewinder should rise and fall steadily and rise and fall in parallel. The bottom knife roller and the upper knife axis should be parallel to the bottom roller, the distance to the bottom roller should be accurate, and the rotation should be flexible. After the slitter rewinder is installed and calibrated, check whether all the parts are intact, whether the connecting bolts are tightened reliably, and whether the movable parts are flexible, and then fill the lubrication parts with corresponding lubricating oil. Clean, clean, check and refuel. It can be turned on after confirming that it is correct.

Users should decide the legal model of paper machine equipment based on their own output and investment.The finished paper produced by the paper machine should be dried and stored conditionally, and the rest should be protected from water, fire and other ingredients.