Paper cutter working principle

The operation of the paper cutter is relatively simple and the requirements on the environment are not high. Usually in the general office, the power supply can ensure the power to work. Generally, the paper cutter has an automatic switch system. As long as the paper is lost during the input process, the cutter will automatically rotate to cut the paper. Some cutters need to press the start key once, and the cutter will rotate to continue cutting. After shredding, press the Stop / Reverse key to stop the cutter from turning.

Before shredding the paper, check whether there are hard objects such as paper clips and staples on the document to be broken. If there is, it should be removed and put into the paper port, otherwise the cutter may be damaged. When using the cutter, you should pay attention not to jam too many papers at once, especially the better quality paper, and pay more attention when using to avoid paper jams. Try not to skew the paper when putting it in. Try to place the paper in the center of the paper inlet.

For early products, if a paper jam occurs during use, press the back button or the stop button to enable the broken pieces to continue to be used. Most of the paper cutters are equipped with overload power-off protection devices. When the motor overloads and heats up, it will automatically stop. At this time, the use of 20-30 minutes should be stopped to allow the motor to cool. At the same time, it should be considered to reduce the amount of input paper appropriately when re-using. More advanced paper cutters will automatically stop and automatically eject paper once overloaded, making it more convenient to use. When the box of the paper cutter is full, some machines will also automatically sound to remind people to remove paper scraps in time.