Views: 3 Author: Site Editor Publish Time: 2020-05-17 Origin: Site
1. The paper slitting machine needs to cut the entire roll or the whole raw material with a fixed length, such as plastic packaging materials, packaging cartons, steel plates, films, leather, wood chips, etc., and must use fixed-length cutting control.
2. The cutting length can be set continuously. If there is an error in the actual cutting length, it is easy to calibrate by setting parameters.
3. The slitting control of paper slitting machine is divided into static and dynamic slitting: when the set length is reached, it will stop accurately, and then the static slitting process will restart after the slitting; when the set length is reached, it will be issued without stopping. Slitting signal, the slitting machine dynamically slits during material movement.
The central part of the paper tube cutting machine is equipped with a main shaft for processing the paper tube. The front end of the main shaft is fixed on the base with a set of bearings, and a pulley is installed in the middle of the set of bearings; a compression cylinder is installed near the base and supported by the cylinder A set of support rod bearings is installed at the upper end of the rod to support the main shaft.
The main knife shaft is installed on the upper end of the paper tube cutting machine, and a number of blades are arranged on it, and arranged at a certain gap; the support frame of the main knife shaft is also provided on the top of the paper tube cutting machine. A supporting cylinder is installed in the middle.
The structural advantages of the paper tube cutting machine fill the technical gap of the automatic tube cutting machine.