Some suggestions for the use of automatic slitting machine

Automatic slitting machine is a kind of mechanical equipment that cuts wide-width paper or film into multiple narrow-width materials. It is commonly used in papermaking machinery and printing and packaging machinery. It has the advantages of stable operation, convenient operation, strong adaptability and high output.

　　Before the automatic slitting machine is put into operation, we must first check whether the working positions are properly adjusted, and the parts that need to be lubricated should be filled with grease in advance to check whether the tools are sharp. Before the equipment is ready for operation, all personnel must be notified to leave the equipment to ensure personal safety before starting operation; do not touch the film roll or roll core in operation with hands to avoid personal injury caused by entanglement; do not scratch with a knife or hard object , Cut each roller core.

　　 When using the automatic slitting machine, we must pay attention to ensure that the voltage, current and hydraulic pressure are correct and stable before starting. After everything is normal, you can run the car empty first to check for abnormalities, and enter the processing order into the computer for inspection in advance; after the equipment is put into operation, the best working condition of the equipment should be adjusted in time according to the production situation to ensure the indentation of the slitting machine Moderate, no burrs on slitting, proper trimming on both sides. To ensure the smooth feeding and discharging of the cross-cutting machine, and the accurate cutting length, it also takes time to monitor the operation of the cross-cutting machine connected with production management to prevent paper jams and defective products.

　　 After the work is completed, clean up the dust and paper dust on the equipment in time, check the cutters and grinding wheels, drain the oil and moisture high device and the water in the gas storage tank, and check whether there are any abnormalities in the operating parts. Then, cut off the power supply according to the operating requirements of the manual and maintain the computer operating system.

　　 In addition, if there is a problem with the automatic slitting machine, you must find a professional to repair it, and the switch must be turned off before repairing to avoid potential safety hazards.