What are the common faults of paper rewinding machine

Paper rewinding machine is a kind of equipment used for paper, mica tape and film. Its purpose is to rewind the paper rolls (called base paper rolls) produced by the paper machine one by one. After the paper is rewinded, it is made into finished paper.

The paper roll rolled by the paper reel is relatively soft, the inside may be damaged or broken, the edges on both sides are not neat, and the width of the paper web cannot be directly used in paper processing or printing machines. Most paper types (newsprint, Letterpress printing paper, packaging paper, etc.) need to go through Paper rewinding machine trimming, slitting, jointing, and rewinding on the paper roll core to form a finished paper roll with corresponding specifications and corresponding tightness requirements before leaving the factory.

1. The equipment rewinding is uneven

Most of this situation is because the paper core is not suitable, and the paper core with the specified inner diameter needs to be disassembled, and the winding pressure roller is used in the winding process, which can also avoid uneven winding of the equipment.

2. the raw material is wrinkled

The key is that the winding tension is wrong. Adjust the winding tension suitable for the equipment. The winding application pressure roller and the slitting material wraps the pressure roller and then enters the winding paper core.

3. Miscounting and counting errors

For this kind of problem, the two wheels of the meter wheel should touch the feeding rubber stick together, and make a mark on the meter wheel with 5 hand-cranked laps to calculate 1 meter, otherwise the meter wheel should be replaced.