What are the factors that affect the safe use of paper cutter products?

As one of the indispensable equipments for paper processing at present, the paper cutter is easy to use and must pay attention to the use of safety and literature. Many operators tend to ignore safety when operating paper cutter equipment, resulting in unnecessary losses. So what are the factors that affect the safe use of paper cutter products?

1.brakes. In order to save money, many manufacturers adopt the principle of circuit braking, that is, the upper and lower limit sensors cut off the power supply of the cutter motor to brake. This kind of device may cause "slippery knife" in the case of sudden power failure, loose socket, sensor failure, etc. extremely dangerous situation. In order to prevent this from happening, it is necessary to use a motor assembly with a mechanical brake device, so that no matter what circuit failure occurs, the motor is locked to avoid accidents.

2. Double button operation principle. This requires two buttons to be pressed at the same time, otherwise the cutter motor will not act, which can ensure the absolute safety of single-person operation.

3. In the actual use process, two people often cooperate to operate, so the situation becomes very dangerous, which requires the paper cutter to be equipped with front and rear safety covers. When the safety cover is opened, the motor will not operate to ensure safety.

4. The above are the safety factors that affect the use process. Then, when replacing the blade during maintenance and maintenance, use the blade holder to ensure that the blade edge is closed, which not only ensures the safety of people, but also ensures that the blade edge is not damaged.

The development and evolution of the paper cutter

5. In addition, the removed blade must not be put aside at will to avoid hurting people.

Only by operating the paper cutter products safely can the safety factor of the paper cutter be improved. Generally speaking, the use of paper cutters must develop good habits, so as to ensure the safety of the equipment.