Views: 3 Author: Site Editor Publish Time: 2021-10-14 Origin: Site
Paper cutting machine is a traditional product, which is used to deal with the paper cutting needs in the later stage of printing. From the mechanical paper cutter to the tape-controlled paper cutter, and to the computer program control, color display, full-image operation guided visual processing and computer-aided cutting cutting system with external programming and editing production data, making production preparation time Shorter, higher cutting precision, lower labor intensity, and safer operation. Next, the editor of Yisitai will share with you what is the working principle of the paper cutting machine!
The operation of the Paper cutting machine is relatively simple, and the requirements for the environment are not high. Usually in the general office, the power supply can be used to ensure that the power supply can be used for work. Generally, the paper cutter has an automatic switch system. As long as the paper is fed in, the paper cutter will automatically rotate to shred the paper. For some paper cutters, you need to press the start button once, and the paper cutter will rotate to continue cutting. After shredding, press the stop/reverse key to stop the paper cutter.
Before shredding the paper, check whether there are hard objects such as paper clips and staples on the documents to be shredded. If there is, it should be removed and then put into the paper opening, otherwise the cutter may be damaged. When using the paper cutter, you should be careful not to jam too much paper, especially paper of better quality, and pay more attention when using it to avoid paper jams. The paper should be placed in the center of the paper inlet as far as possible.
For early products, once a paper jam occurs during use, you should press the reverse button or stop button to enable the shredder to continue to be used. Most Paper cutting machines are equipped with overload and power-off protection devices. When the motor is overloaded and heats up, it will automatically stop. At this time, stop using it for 20-30 minutes to allow the motor to cool down. At the same time, consider appropriately reducing the amount of input paper when using it again. The more advanced paper cutter will automatically stop and eject the paper once it is overloaded, which is more convenient to use. When the box of the paper cutter is full, some machines will automatically make a sound to remind people to remove the paper scraps in time.