Views: 5 Author: Site Editor Publish Time: 2020-05-28 Origin: Site
The operation of the paper cutter is relatively simple, and the requirements on the environment are not high. Usually in the general office, the power supply can be used to ensure power supply to work. Generally, the paper cutter has an automatic switch system. As long as the old paper is lost during the input, the paper cutter will automatically rotate to shred the paper. Some paper cutters need to press the start button once, and the cutter will rotate to continue cutting. After shredding, press the stop / reverse key to stop the cutter from rotating.
Before shredding paper, you should check whether there are hard objects such as paper clips and staples on the documents to be shredded. If there is, it should be removed and put into the paper port, otherwise the cutter may be damaged. When using the paper cutter, be careful not to jam too much paper at a time, especially paper of better quality, and pay more attention when using it, so as to avoid paper jams. Try not to skew the paper when loading it. The paper should be placed in the center of the paper inlet as much as possible.
For early products, once a paper jam occurs during use, you should press the rewind key or the stop key to enable the crush to continue to be used. Most paper cutters are equipped with overload and power-off protection devices. When the motor overloads and heats up, it will automatically stop. At this time, the use of 20-30min should be stopped to cool the motor. At the same time, when using it again, you should consider appropriately reducing the amount of input paper. The more advanced paper cutter will automatically stop and automatically eject the paper once it is overloaded, which is more convenient to use. When the box of the paper cutter is full, some machines will automatically make a sound to remind people to remove paper scraps in time.