During the production of the rewinder equipment, due to the problem of lateral warpage of the steel plate, the width dimension is not good. This is because the product cut under the lateral warping state is larger than the set value of the knife.

The new method has obvious advantages compared with the traditional beater and disc grinder:(1) Energy saving: saving 30%-40% of electricity consumption per ton of pulp.(2) Environmental protection: save electricity by more than 50% per ton of pulp.(3) High efficiency: the physical strength index of pulp fiber is increased by 10%-35%

The Drum Pulper sets pulping and screening in one, particularly suitable for the pulping of unselected waste paper raw materials, which is of greater economic and social benefits for the expansion of secondary fiber recycling and use, reduction of environmental pollution, energy conservation, achievement of the domestication of paper making equipment and saving of foreign exchange.

Felt Suction Box Design features:Best choice of dot One time made ceramic Easy to replace and long service life,High-strength matrix of fiber glass/carbon fiber Firmly fixed and stable structure Effectively protect forming wire

(1) Remove as much moisture from the paper web as possible with the help of mechanical pressure.(2) Reduce steam consumption in the drying section.（3) Increase the binding force of fibers in the paper web, and improve the tightness and strength of the paper.