Views: 5 Author: Site Editor Publish Time: 2020-12-18 Origin: Site
Piping configuration of pulp screen basket and rotor.
1. Slurry inlet pipe: Install a valve, and set a bypass clean water pipeline on the slurry inlet pipe to prepare for flushing the screen drum and shell. The inlet pressure is 0.1-0.25Mpa.
2. Slurry outlet pipe: equipped with a valve, the diameter of the slurry outlet pipe is configured according to the diameter of the slurry outlet, and the pressure difference between the slurry inlet and the slurry outlet is 0.01-0.04Mpa.
3. Tail slurry pipe: equipped with a valve, the diameter of the tail slurry pipe is configured according to the size of the tail slurry opening, and the tail slurry opening opening depends on the type and quality of the slurry.
4. Mechanically sealed water pipe: water pressure: 0.05Mpa higher than the slurry inlet pressure, flow rate: 6-12L/min5, exhaust pipe: this pipe is set on the top of the upper cover to discharge the air in the machine, and a valve should be configured here , It is connected with a hose when it is connected to the outside, which is convenient for the lifting and rotation of the upper cover.