The pressure screen rotor adopts an upflow structure design with slurry at the bottom, heavy slag discharge at the bottom, and light slag discharge at the top, which effectively solves the above problems.
The pressure screen rotor padopts the upflow structure design of slurry feeding at the bottom, heavy slag discharge at the bottom, and light slag discharge at the top, which effectively solves the above problems.
99M3 D Type Hydrapuler are ready for shipment. It is for 1000tpd capacity stock preparation line. According to technology change, customer changed drum pulper to D type hydrapulper.
The pulp screen basket and rotor adopts the up-flow structure design of slurry at the bottom, heavy slag at the bottom, and light slag at the top, which effectively solves the above problems.
Shandong easttai can use the most suitable rotor according to the customer, such as different pulp, different consistency and different processing positions. In addition, it also provides equipment upgrade services.
Piping configuration of pulp screen basket and rotor. 1. Slurry inlet pipe: Install a valve, and set a bypass clean water pipeline on the slurry inlet pipe to prepare for flushing the screen drum and shell. The inlet pressure is 0.1-0.25Mpa.