Due to the knowledge of the calender, the soft roll surface material rebounds, so that the roll surface can adapt to any poor uniformity and quantitative changes of the paper. The thinner area of the paper is in contact with the heat roller, and for the thicker area, the thickness will not be greatly reduced. Such thick and thin areas can increase its fine smoothness and eliminate stains.

When the automatic screen coating machine is running online with other automatic screen processing equipment (such as cleaning equipment, regeneration equipment, drying device and developing machine), it is more convenient to install the plate from the side.

Cleaning of the knife head of the coating machine (suitable for changing the glue model and coating method): Wipe with dry gauze after the equipment is heated. Coat the roller in the composite position; use clean dry gauze to wipe the surface dust; if there is glue on the surface, do not use organic solvents to avoid damage to the rubber roller, and use a strong curing adhesive to remove it.

Correctly do the daily maintenance and maintenance of the coating machine, and check some aspects at regular intervals to see some of the equipment, especially the problem of loose screws. In the maintenance process, we should also do a good job in cleaning, and we can do a good job in these aspects. After the entire cleaning work is done better, then there will be more for our next applications. It’s a guarantee, so be sure to do these things in advance.

Today, Jinan easttai editor Share with you the maintenance knowledge of the coating machine: how to do the daily maintenance work, and what are some specific methods?