Views: 1 Author: Site Editor Publish Time: 2021-01-12 Origin: Site
Many customers' vibrating screens are usually produced in the open air, so the screen of the vibrating screen is usually rusty due to rain, humidity and other reasons. What should I do if the screen of the vibrating screen is rusted, and how to prevent and remove rust? This time I mainly share three points of knowledge in this area:
1. Set the isolation layer
The main reason for the rust of the vibrating screen is due to the chemical reaction between its surface and the moisture in the air. Therefore, to prevent the rust of the screen, the screen of the vibrating screen must be isolated from the air. At this time, we can set an isolation layer on the screen, for example, apply petroleum jelly, engine oil, paint, etc. on the screen, or use hot-dip, electroplating, spray coating and other methods to plate corrosion-resistant metal on the screen, usually forming an oxide film to isolate the air Corrosion to the screen, and then do a good job of anti-rust work, reduce the rust of the screen.
2. Do a good job of cleaning dirt and grease
After the vibrating screen is used for a period of time, grease or dirt will adhere to the surface. If it is not cleaned in time, the screen will rust. Therefore, the impurities on the screen should be cleaned up in time after using the vibrating screen. It can be cleaned with soap, warm water or weak detergent. If there is oily dirt, you can wipe it with a soft cloth and then wash it with detergent. If there is rust on the surface of the vibrating screen, it can be cleaned with nitric acid, other derusting materials and other derusting acids; if rainbow patterns appear, it can be cleaned with neutral detergent in warm water.
3. Place the vibrating screen in a suitable place
The reason why the vibrating screen is prone to rust is due to the open-air production method. If you want to fundamentally solve the problem of vibrating screen rust, you can use closed production or place the vibrating screen in a relatively clean and dry environment. Reduce the contact between the vibrating screen and the moisture in the air and solve the rust problem of the screen. This method can also reduce the dust pollution problem of the vibrating screen. Vibrating screen rusting Everyone usually knows that putting the vibrating screen in the room can be solved, but the site conditions are usually not available, so only the first two aspects can be used for the vibrating screen screen. For a longer time, the rust of the vibrating screen screen has a great impact on the production. If rust occurs, please deal with it in time. If there is anything you don’t understand, you can consult the vibrating screen manufacturer.
The above introduces the reasons for the rust of the vibrating screen and the solutions. The rust of the vibrating screen will not only affect the production efficiency of the vibrating screen, but also affect the production efficiency of the entire machine-made sand production line. Therefore, when rust occurs, you must Deal with it in time.