How to carry out daily maintenance measures for the rewinder

The rewinder is a special equipment for papermaking. The purpose is to sequentially rewind the paper rolls (called base paper rolls) produced by the paper machine. After the paper passes through the rewinder, it is made into finished paper and leaves the factory. At present, the use of AC drives in rewinders instead of DC drives has become a development trend in the tissue processing equipment industry.

  The rewinding machine is mainly used to convert large toilet paper from a single-layer rewinding and slitting machine to a single-layer, two-layer or three-layer specification for folding paper towels, napkins, boxed facial tissues, etc. This rewinder adopts well-known factory blades, vacuum suction edge, fixed upper knife angle, neat cutting, stable operation, and is an ideal supporting equipment for paper mills or paper mills.

  When using a rewinder, you will encounter a rewinder failure. The maintenance of the rewinder is as follows:

1. The transmission of the rewinder, such as the gear chain, needs to be lubricated for a period of time.

2. Rewinders usually do not cause problems. The wearing parts are nothing but pinions. If one is added, the printing knife can easily break. After one and a half years of use, the wool roller will become thinner. It needs to be sent back to the factory for repair. If you need to change the embossing pattern on the steel roll embossing device, you need to transport the steel roll back to the original factory for modification, and the cost is not high.