During the production of the rewinder equipment, due to the problem of lateral warpage of the steel plate, the width dimension is not good. This is because the product cut under the lateral warping state is larger than the set value of the knife.

Rewinder, toilet paper production equipment. It can be divided into Bottom feeding rewinder and High-speed Top And Bottom Feeding Rewinder

The lifting mechanism of the rewinder should rise and fall steadily and rise and fall in parallel. The bottom knife roller and the upper knife axis should be parallel to the bottom roller, the distance to the bottom roller should be accurate, and the rotation should be flexible. After the slitter rewinder is installed and calibrated, check whether all the parts are intact, whether the connecting bolts are tightened reliably, and whether the movable parts are flexible, and then fill the lubrication parts with corresponding lubricating oil. Clean, clean, check and refuel. It can be turned on after confirming that it is correct.

The maintenance of the rewinder should pay attention to the following three points. As long as practical attention is paid to production, the service life of the rewinder will be extended. Improve productivity.

The rewinder is a special equipment for papermaking. The purpose is to sequentially rewind the paper rolls (called base paper rolls) produced by the paper machine. After the paper passes through the rewinder, it is made into finished paper and leaves the factory. At present, the use of AC drives in rewinders instead of DC drives has become a development trend in the tissue processing equipment industry.