How to make paper cutter knives more durable First, pay attention to whether the paper cutter has a slippery knife deviation, and whether the cutting accuracy meets the required standard.

In die-cutting production, rough edges are one of the common faults. The causes can be summarized as follows: 1. The cutting edge of the die cutter is deformed and dull Excessive die-cutting pressure, increased die-cutting times and the presence of sand particles on the semi-finished pro

The operation of the paper cutter is relatively simple and the requirements on the environment are not high. Usually in the general office, the power supply can ensure the power to work.

In the actual use of the paper cutter, two people often cooperate to operate it. This situation becomes very dangerous, which requires the paper cutter to be equipped with a front and rear safety cover. When the safety cover is opened, the motor will not move to ensure safety.

The range of materials that need to be cut with a paper cutter is becoming wider and wider, such as beer aluminum foil caps, carbonless carbon paper, honeycomb cardboard, magnetic cards, photosensitive films, etc. These materials will encounter different practical problems during the cutting process.

Why does the cutter of the paper cutter break? The selection of the blade sharpening angle, the quality of the sharpening, and the blade grinding clearance time affect the flatness and smoothness of the paper cutting edge