Auxiliary parts of paper machines usually include white water system, vacuum system, compressed air system, chilled water system, chemical dosing system, broken paper recovery system, ventilation system, etc. In the actual design of the paper machine, in order to make the paper machine run continuously
The lifting mechanism of the rewinder should rise and fall steadily and rise and fall in parallel. The bottom knife roller and the upper knife axis should be parallel to the bottom roller, the distance to the bottom roller should be accurate, and the rotation should be flexible. After the slitter rewinder is installed and calibrated, check whether all the parts are intact, whether the connecting bolts are tightened reliably, and whether the movable parts are flexible, and then fill the lubrication parts with corresponding lubricating oil. Clean, clean, check and refuel. It can be turned on after confirming that it is correct.
The maintenance of the rewinder should pay attention to the following three points. As long as practical attention is paid to production, the service life of the rewinder will be extended. Improve productivity.
The rewinder is used to rewind all kinds of tape, paper and film, such as BOPP tape, PE protective film, PET tape, double-sided tape, masking tape, cloth tape, polyester film tape, foam, etc. When we all operate and use the rewinder, we all need to operate according to the above operating procedures, and the correct operating procedures are what we all need.