1. Fasten all parts on the vibrating screen, especially the screen plate that needs to be replaced frequently, to avoid extra vibration due to the loosening of individual parts; 2. Replace the perforated steel sieve with a polyurethane sieve or rubber sieve with small elastic modulus and low noise;

After the vibrating screen is used for a period of time, grease or dirt will adhere to the surface. If it is not cleaned in time, the screen will rust. Therefore, the impurities on the screen should be cleaned up in time after using the vibrating screen. It can be cleaned with soap, warm water or weak detergent. If there is oily dirt, you can wipe it with a soft cloth and then wash it with detergent. If there is rust on the surface of the vibrating screen, it can be cleaned with nitric acid or other derusting acids; if rainbow patterns appear, it can be cleaned with neutral detergent in warm water.

The paper machine production line is composed of many ancillary equipment, and there are many ancillary equipment in it. Among them, the pulping equipment is one of the important supporting equipment, and it occupies an important place in the paper machine production line. In the production line, if there is no pulping equipment, the pulp raw material cannot complete the pulp production operation, and the remaining papermaking production process cannot operate normally.

Many customers' vibrating screens are usually produced in the open air, so the screen of the vibrating screen is usually rusty due to rain, humidity and other reasons. What should I do if the screen of the vibrating screen is rusted, and how to prevent and remove rust? This time I mainly share three points of knowledge in this area:

Because the vibrating screen is affected by various environments and materials on site, coupled with the characteristics of the mechanical product itself (limited service life), it is inevitable to repair the vibrating screen. More importantly, the maintenance of the vibrating screen has a direct impact The quality of the products screened out, therefore, the accurate maintenance and maintenance of the vibrating screen is particularly important. Vibrating screen manufacturer Guosheng Machinery, teach you how to maintain and maintain the vibrating screen!

The core component of the Easttai disc filter is the stacked plastic filter discs. There are special grooves or edges on the filter discs. The grooves or edges on the adjacent filter plates form a channel of a certain size, which is larger than the channel. This product can replace traditional mechanical filtration devices such as sand filters within a certain range, and has superior performance and much lower water and electricity consumption than other products.