Generally, it can be divided into main body and auxiliary system, and the main part is divided into wet part, stem part and curl part. The wet end can be understood as the part of the paper with a high water content; the dry part is the dry part with very little water; and the curl is the mechanism

The parts of the daily inspection of the paper machine are as follows:1. Whether the connection lines are in poor contact, especially the associated signal lines, such as feedback lines, communication lines, input and output lines between load distribution points, etc.;2. Check the PLC program, whet

There will be short heads in the drying section of the paper machine. Even if the wet paper sheets entering the drying section have a dryness of more than 32%, they have a certain strength. Let's take a look at the main reasons for the breakage of the drying section of the paper machine with the edi

The failures that often occur in paper machines include two aspects: one is the inherent production failure downtime.Paper-making machinery and equipment are carried out on the premise of ensuring product quality and meeting the requirements of the production process, especially the production of cu

Maintenance measures of papermaking equipment should consider theseThe operational performance and reliability of papermaking equipment are greatly tested because they usually work in harsh process environments such as heavy load, strong corrosion, and high temperature.On the one hand, strengthening

If the dewatering capacity of the cage is allowed to be formed, the concentration of the headbox should be reduced.