In the process of daily use, we must pay attention to daily maintenance and maintenance work, so as to effectively promote the long-term transportation role of the machine.

An anti-blocking valve is provided on the discharge end cover plate. In case of blockage, due to material accumulation, open the anti-blocking door and cut off the power supply through the travel switch. Minimize the horizontal size of the center suspension bearing as much as possible to reduce the possibility of data blocking when passing through the center bearing. Choose technical parameters reasonably, such as slow travel speed not too high.

The pressure screen rotor padopts the upflow structure design of slurry feeding at the bottom, heavy slag discharge at the bottom, and light slag discharge at the top, which effectively solves the above problems.

The casing of the tubular screw conveyor is a steel tube, so there are two ways to clean it up: flushing with water or ventilating. Water injection finishing refers to a large amount of water flushing the pipe through the feed inlet to flush out the remaining materials. Ventilation is to use an air pump or a fan to pass a large amount of air into the pipe and blow the material out of the pipe. Both of these methods can easily clean up the materials in the tube.

Do a good job in the maintenance of the conveyor belt, whether it is a belt conveyor or a belt conveyor with a large inclination angle, can better serve us, thereby improving production efficiency, effectively saving production costs, and ultimately improving the efficiency of the enterprise.

The screw shaft and the suspension bearing, the head and tail shafts are all connected with the embedded tongue, and the installation and disassembly do not need axial movement, and the maintenance is convenient. , Long mandrel, less hanging, less failure points.